Publication list

原著論文 / Reviewed articles

2023

  • Toshiro Sakabe, Yasuyuki Ogino, Keisuke Mukai, Juro Yagi, Mahmoud Bakr, Influence of the Hydrogen Isotope Affinity of the Cathode Coating Material on the Neutron Production Rate in the Glow Discharge–Type Fusion Neutron Source, Fusion Science and Technology (in press) DOI: 10.1080/15361055.2023.2227821 博士課程・坂部君のDLCコーティングによる中性子発生率の増大に関する論文
  • Ryo Ito, Fu Nomoto, Yasuyuki Ogino, Keisuke Mukai, Juro Yagi, Lithium Isotope Enrichment Effects in Liquid Metal/Chloride Molten Salt System, Fusion Sci. Technol. 2023 (in press).
    DOI: 10.1080/15361055.2023.2229673     修士課程・伊藤君のLi濃縮効果をまとめた論文
  • Yasuyuki Ogino, Shunsuke Kenjo, Toshiro Sakabe, Keisuke Mukai, Mahmoud Bakr, Juro Yagi, Satoshi Konishi, Measurements of Thermal and Epithermal Neutron Spatial Distribution Using Activation Foils Inside a Fusion Blanket Mock-Up, IEEE Trans. Plasma Sci. (in press) DOI: 10.1109/TPS.2023.3293708
    荻野君の博士時代の放射化箔による中性子計測に関する論文
  • Keisuke Mukai, Measurement of thermal expansion anisotropy in Be12Ti and Be12V, Nuclear Materials and Energy 36 (2023) 101473. DOI: 10.1016/j.nme.2023.101473　
    向井助教とQSTの共同研究、熱膨張異方性に関する論文
  • Keisuke Mukai, One-step fabrication of Li2TiO3 ceramic pebbles using pulsed YAG laser Journal of the American Ceramic Society 106 ( 2023) 5735–5742. DOI: 10.1111/jace.19289　向井助教のYAGレーザーを使ったペブル製造手法に関する研究
  • M. Bakr, T. Sakabe, J.-P. Wulfkühler, K. Mukai, T. W. Smith, Y. Ogino, M. Tajmar, T. Scott, S. Konish,
    Influence of electrodes’ geometrical properties on the neutron production rate of a discharge fusion neutron source , Physics of Plasmas 30 (2023) 032701. DOI: 10.1063/5.0134631元研究員Bakrさんの中性子源の電極形状影響に関する論文

2022

  • Keisuke Mukai, Ryuta Kasada, Jae-Hwan Kim, MasaruNakamichi Electronic descriptors for vacancy formation and hydrogen solution in Be-rich intermetallics Acta Materialia 241 (2022) 118428.
    DOI: 10.1016/j.actamat.2022.118428 向井助教の物性を予測する電子的記述子に関する論文
  • Richard Pearson, Colin Baus, Satoshi Konishi, Keisuke Mukai, Andrea D’Angiò and Shutaro Takeda, Overview of Kyoto Fusioneering’s SCYLLA(“Self-Cooled Yuryo Lithium-Lead Advanced”) Blanket for Commercial Fusion Reactors, IEEE Transactions on Plasma Science 50 (2022) 4406-4412. DOI: 10.1109/TPS.2022.3211410. 京都フュージョニアリングのブランケット開発に関する論文
  • Shuhei Yamaguchi, Keisuke Mukai, Juro Yagi, Satoshi Konishi, Evaluation of Hydrogen Isotope Transport Performance Using Proton Conductors for Divertor Pumping System, IEEE Transactions on Plasma Science 50 (2022) 4262-4266.
    DOI: 10.1109/TPS.2022.3218465 修士課程・山口君のプロトン導電体を使った水素輸送に関する論文
  • Yuto Murata, Juro Yagi, Keisuke Mukai, Satoshi Konishi, Solubility of Bi in Li–Pb Eutectic Alloy Between 508 and 623 K, IEEE Trans. Plasma Sci. (2022) In press.
    DOI: 10.1109/TPS.2022.3183286 修士課程 ・村田君の液体LiPb中のBi溶解度に関する論文
  • Toshiro Sakabe, Shunsuke Kenjo, Yasuyuki Ogino, Keisuke Mukai, Mahmoud Bakr, Juro Yagi, Satoshi Konishi, Effects of Metal Hydride Coatings at the Electrodes on Neutron Production Rate in a Discharge-Type Fusion Neutron Source, IEEE Transactions on Plasma Science (2022) In press.
    DOI: 10.1109/TPS.2022.3182723
    博士課程・坂部君の中性子源電極への水素化物コーティングに関する論文
  • Sota Miura, Kazuki Nakamura, Erika Akahoshi, Juro Yagi, Yoshimitsu Hishinuma, Teruya Tanaka, Takumi Chikada, The synergy of heavy-ion irradiation and lithium-lead corrosion on deuterium permeation behavior of ceramic coating. Nuclear Materials and Energy 30 (2022) 101109 DOI: 10.1016/j.nme.2021.101109　静大との共同研究でイオン照射と腐食効果に関する論文
  • Keisuke Mukai, Shunsuke Kenjo, Naoto Iwamatsu, Bakr Mahmoud, Takumi Chikada, Juro Yagi, Satoshi Konishi, Hydrogen permeation from F82H wall of ceramic breeder pebble bed: The effect of surface corrosion. International Journal of Hydrogen Energy 47 (2022) 6154-6163 DOI: 10.1016/j.ijhydene.2021.11.225　修士課程・岩松君と向井助教の腐食が水素透過に与える影響を調べた論文
  • Shunsuke Kenjo, Yasuyuki Ogino, Keisuke Mukai, Mahmoud Bakr, Juro Yagi, Satoshi Konishi Employing of ZrCo as a fuel source in a discharge-type fusion neutron source operated in self-sufficient mode. International Journal of Hydrogen Energy 47 (2022) 3054-3062 DOI: 10.1016/j.ijhydene.2021.10.250 修士課程・見城君の中性子源の燃料閉じ込め化に関する論文
  • Yuki Koga, Hideaki Matsuura, Kazunari Katayama, Teppei Otsuka, Minoru Goto, Shimpei Hamamoto, Etsuo Ishitsuka, Shigeaki Nakagawa, Kenji Tobita, Satoshi Konishi, Ryoji Hiwatari, Youji Someya, Yoshiteru Sakamoto. Effect of nuclear heat caused by the 6Li(n,α)T reaction on tritium containment performance of tritium production module in High-Temperature Gas-Cooled reactor for fusion reactors. Nuclear Engineering and Design 386 (2022) 111584 DOI: 10.1016/j.nucengdes.2021.111584 高温ガス炉を使ったトリチウム生成性能に関する共著論文

2021

  • H. Nam, S. Konishi, K. W. Nam. Comparative analysis of decision making regarding nuclear policy after the Fukushima Dai-ichi Nuclear Power Plant Accident: Case study in Germany and Japan. Technology in Society 67 (2021) 101735 DOI: 10.1016/j.techsoc.2021.101735　卒業生・南君の原子力政策の分析に関する論文
  • M.M. Islam, M. Bakr, J. N. Aboa, F.A. Selim, New thermally stimulated emission spectrometer for the detection of ultra-shallow low-density traps. Journal of Applied Physics 130 (2021) 033104 DOI: 10.1063/5.0050938 研究員Bakrさんの熱励起放出分析に関する共著論文
  • Xiangyu Wu, Sosuke Kondo, Hao Yu, Yasuki Okuno, Masami Ando, Hironori Kurotaki, Shigeru Tanaka, Kazuyuki Hokamoto, Ryosuke Ochiai, Satoshi Konishi, Ryuta Kasada, Bonding strength evaluation of explosive welding joint of tungsten to ferritic steel using ultra-small testing technologies. Materials Science and Engineering: A 826 (2021) 141995. DOI: 10.1016/j.msea.2021.141995
    修士課程の落合さん、笠田先生（東北大）らの 超微小試験技術に関する論文
  • Ryo Omura, Juro Yagi, Keisuke Mukai, Makoto Oyaidzu, Kentaro Ochiai, Atsushi Kasugai, Satoshi Konishi, Analysis of nitrogen distribution in iron-titanium alloys after nitrogen trapping in liquid lithium by using soft X-ray emission spectroscopy, Fusion Engineering and Design 170 (2021) 112548. DOI: 10.1016/j.fusengdes.2021.112548　修士課程・大村君の窒素ゲッター材の窒素分布分析に関する論文
  • Sota Miura, Kazuki Nakamura, Erika Akahoshi, Sho Kano, Juro Yagi, Yoshimitsu Hishinuma, Teruya Tanaka, Takumi Chikada. Lithium-lead corrosion behavior of zirconium oxide coating after heavy-ion irradiation, Fusion Engineering and Design 170 (2021)112536. DOI: 10.1016/j.fusengdes.2021.112536　
    酸化物被膜の腐食効果に関する共著論文
  • Hideaki Matsuura, Takuro Suganuma, Yuki Koga, Motomasa Naoi, Kazunari Katayama, Teppei Otsuka, Minoru Goto, Shigeaki Nakagawa, Shinpei Hamamoto, Etsuo Ishitsuka, Kenji Tobita, Satoshi Konishi, Ryoji Hiwatari, Youji Someya, Yoshiteru Sakamoto, The T-containment properties of a Zr-containing Li rod in a high-temperature gas-cooled reactor as a T production device for fusion reactors. Fusion Engineering and Design 169 (2021) 112441. DOI: 10.1016/j.fusengdes.2021.112441　Zr-Liロッドのトリチウム保持に関する共著論文
  • Yasuyuki Ogino, Keisuke Mukai, Juro Yagi, Satoshi Konishi. Simulations for practical measurement methods of spatial neutron distribution inside blanket mock-up irradiated with DT neutrons. Fusion Engineering and Design 168 (2021) 112417. DOI: 10.1016/j.fusengdes.2021.112417 博士課程・荻野君の中性子輸送計算に関する論文
  • Mahmoud Bakr, Keisuke Mukai, Kai Masuda, Juro Yagi, Satoshi Konishi, Characterization of an ultra-compact neutron source based on an IEC fusion device and its prospective applications in radiography. Fusion Engineering and Design 167 (2021) 112346. DOI: 10.1016/j.fusengdes.2021.112346　
    研究員Bakrさんの中性子ラジオグラフィに関する論文
  • Keisuke Mukai, Yasuyuki Ogino, Makoto Kobayashi, Mahmoud Bakr, Juro Yagi, Kunihiro Ogawa, Mitsutaka Isobe and Satoshi Konishi. Evaluation of tritium production rate in a blanket mock-up using a compact fusion neutron source. Nuclear Fusion 61 (2021) 046034. DOI: https://doi.org/10.1088/1741-4326/abe4e7　
    向井助教の小型中性子限を使ったニュートロニクス実験に関する論文
  • Takumi Chikada, Matthias H.H.Kolb, Hikari Fujita, Kazuki Nakamura, Keisuke Kimura, Marcin Rasinski, Yoshimitsu Hishinuma, Keisuke Mukai, Regina Knitter. Compatibility of tritium permeation barrier coatings with ceramic breeder pebbles. Corrosion Science 182 (2021) 109288. DOI: 10.1016/j.corsci.2021.109288　酸化物被膜の腐食作用についての共著論文
  • Mahmoud Bakr, Jan-Philipp Wulfkühler, Keisuke Mukai, Kai Masuda, Martin Tajmar, and Satoshi Konishi. Evaluation of 3D printed buckyball-shaped cathodes of titanium and stainless-steel for IEC fusion system. Physics of Plasmas 28 (202) 012706. DOI: 10.1063/5.0033342　
    研究員Bakrさんの３Dプリント電極の中性子発生効果に関する論文
  • Gaku Yamazaki, Takuya Nagasaka, Juro Yagi, Takuya Goto, Teruya Tanaka, Takashi Watanabe, Akio Sagara, Electrochemical measurements of the corrosion of pure Fe and JLF-1 steel in HF-containing molten FLiNaK salt. Fusion Engineering and Design 162 (2021) 112134. https://doi.org/10.1016/j.fusengdes.2020.112134　
    溶融塩による腐食の電気化学測定に関する共著論文

2020

  • Hoseok Nam, Hyungseok Nam, Satoshi Konishi. Techno‐economic analysis of hydrogen production from the nuclear fusion‐biomass hybrid system. International Journal of Energy Research 2020. https://doi.org/10.1002/er.5994　博士課程・南君の水素製造の経済分析に関する論文
  • Takuma Higashi, Taichi Koyama, Juro Yagi, Takayuki Terai. Preparation of extremely low nitrogen concentration lithium by Fe-5at.%Ti alloy hot trap. Fusion Engineering and Design 161 (2020) 112037. DOI: 10.1016/j.fusengdes.2020.112037　
    低窒素濃度の金属リチウムの作成に関する共著論文
  • Makoto I. KOBAYASHI, Kunihiro OGAWA, Mitsutaka ISOBE, Takeo NISHITANI, Teruki NISHIMURA, Keisuke MUKAI, Sachiko YOSHIHASHI Masaki OSAKABE, Design of Neutron Spectrum-Shaping Assembly Around the Pneumatic Tube-End in the LHD Torus Hall for the Medical Research Application. Plasma and Fusion Research 15 (2020) 2405043. DOI: 10.1585/pfr.15.2405043　
    LHDの中性子スペクトルに関する共著論文
  • Kento Miyamae, H. Yamada, R. Kasada, S. Konishi, R. Sakamoto, Fuel flow and stock during deuterium-deuterium start-up of fusion reactor with advanced plasma modelAuthor links open overlay panel, Fusion Engineering and Design 160 (2020) 111794. DOI: 10.1016/j.fusengdes.2020.111794　核融合炉のD-D起動に関する計算結果とまとめた共著論文
  • Hiroyuki Miyagaki, Juro Yagi, Tomohiro Okada, Keisuke Mukai &Satoshi Konishi. Fundamental Analysis for Electrochemical Extraction and Monitoring of Impurities from Lead Lithium and Lithium with Chloride Molten Salt. Fusion Science and Technology 76 (2020) 458-463. DOI: 10.1080/15361055.2020.1716457　
    修士課程・宮垣君の電気化学的手法による液体金属の純化に関する論文
  • Hoseok Nam, Kenzo Ibano, Satoshi Konishi, Cost analysis and energy return on investment of fuel cell and gas turbine integrated fusion-biomass hybrid system; application of a small scale conceptual fusion reactor GNOME. Energy 203 (2020) 117825. DOI: 10.1016/j.energy.2020.117825　
    博士課程・南君の核融合バイオマス路のコスト計算に関する論文
  • Keisuke Mukai, Masaru Yasumoto, Takayuki Terai, Lithium Vapor Chemistry of Hyper-Stoichiometric Lithium Metatitanate Li2.12(2)TiO3+y, The Journal of Physical Chemistry C 124 (2020) 10870–10877..DOI: 10.1021/acs.jpcc.0c02454　
    向井助教のLiリッチ材の蒸気圧測定と熱力学分析に関する論文
  • Keisuke Mukai, Ryuta Kasada, Kazuya Sasaki, Satoshi Konishi, Occupied Electronic States of Li in Li, Li2O2, and Li2O Analyzed by Soft X-ray Emission Spectroscopy, The Journal of Physical Chemistry C 2020, 124, 9256-9260, DOI: 10.1021/acs.jpcc.0c02885　
    向井助教のリチウム化合物の化学状態分析に関する論文
  • Mohamed Omer and Mahmoud Bakr, Monte Carlo Simulation of γ-γ Correlation Functions. Atoms 2020, 8(1), 6. DOI: 10.3390/atoms8010006 　
    モンテカルロシミュレーションを用いた γ-γ 相関関数に関する共著論文
  • Mahmoud Bakr and Mohamed Omer, Determination of Thermoluminescence Kinetic Parameters of La2O3 Doped with Dy3+ and Eu3+, Materials 13 (2020) 1047. DOI: 10.3390/ma13051047　
    Dy/EuドープLa2O3の熱ルミネッセンスに関する共著論文
  • Tomohiro Okada, Juro Yagi, Hiroyuki Miyagaki, Keisuke Mukai, Satoshi Konishi, Fundamental analysis for electrochemical removal and monitoring of oxide impurities in lead lithium using LiCl-KCl melt. Fusion Engineering and Design 156 (2020) 111597. DOI: 10.1016/j.fusengdes.2020.111597 修士課程・岡田君の酸素除去と濃度モニタリングに関する論文
  • H. Nam, Impact of nuclear phase-out policy and energy balance in 2029 based on the 8th Basic Plan for long-term electricity supply and demand in South Korea. Renewable and Sustainable Energy Reviews 122 (2020) 109723. DOI: 10.1016/j.rser.2020.109723　
    博士課程・南君の韓国の原子力政策に関する論文
  • Shutaro Takeda, Shigeki Sakurai & Satoshi Konishi, Economic Performance of Fusion Power Plant on Deregulated Electricity Markets, Journal of Fusion Energy 39 (2020) 31-39. DOI: 10.1007/s10894-020-00230-z　博士課程・武田君の核融合炉の経済性に関する論文
  • Hoseok Nam, Keisuke Mukai, Juro Yagi & Satoshi Konishi. Economic Analysis of Carbon Removal Strategy by Fusion–Biomass Hybrid System in the Future Market Mechanism. Journal of Fusion Energy (2020) 1-15. DOI: 10.1007/s10894-019-00229-1 博士課程・南君の核融合バイオマスハイブリッド による炭素除去戦略に関する論文
  • Keisuke Mukai, Yasuyuki Ogino, Juro Yagi, Satoshi Konishi, 2-D Evaluation of Bred Tritium Using Neutron Imaging Plate, IEEE Transactions on Plasma Science 48 (2020) 1831-1835. DOI: 10.1109/TPS.2019.2955497　向井助教のトリチウム生成率評価に関する論文

2019

  • Keisuke Mukai, Masatomo Yashima, Keisuke Hibino, and Takayuki Terai, Experimental Visualization of Interstitialcy Diffusion of Li Ion in β-Li2TiO3 ,ACS Appl. Energy Mater. 28 (2019) 5481-5489. DOI: 10.1021/acsaem.9b00639　向井助教のリチウム拡散機構に関する論文
  • Yasuyuki Ogino, Keisuke Mukai, Juro Yagi & Satoshi Konishi, Preliminary Results of Neutron Transport in Blanket Module by MCNP with Profile Analysis Using Imaging Plate, Fusion Science and Technology 2019, 75, 487-492 DOI: 10.1080/15361055.2019.1611343　修士課程・荻野君の放射化箔イメージングプレート使った中性子計測に関する論文
  • Hoseok Nam, Satoshi Konishi, Potentiality of biomass-nuclear hybrid system deployment scenario: Techno-economic feasibility perspective in South Korea. Energy 175 (2019) 1038-1054. DOI: 10.1016/j.energy.2019.03.164　南君の核融合バイオマスハイブリッド炉の経済性評価
  • Keisuke Mukai, Ryuta Kasada, Kiyohiro Yabuuchi, Satoshi Konishi, Jae-Hwan Kim, Masaru. Nakamichi, Valence Electron and Chemical State Analysis of Be12M (M = Ti, V) Beryllides by Soft X-ray Emission Spectroscopy, ACS Appl. Energy Mater. 2 (2019) 2889-2895. DOI: 10.1021/acsaem.9b00223　向井助教のベリリウム化合物の化学状態分析に関する論文
  • Hoseok Nam, Keisuke Mukai, Satoshi Konishi, Kiwoo Nam, Biomass gasification with high temperature heat and economic assessment of fusion-biomass hybrid system, Fusion Engineering and Design 146 (2019) 1838-1842. DOI：10.1016/j.fusengdes.2019.03.047　博士課程・南君のバイオマスのガス化に関する論文
  • Keisuke Mukai, Satoshi Konishi, Preparation for a neutronics experiment using a discharge fusion device and an imaging plate neutron detector, Fusion Engineering and Design, 146 (2019) 1633-1636. DOI: 10.1016/j.fusengdes.2019.03.005　
    向井助教の中性子イメージングに関する論文
  • Fumito Okino, Juro Yagi, Teruya Tanaka, Akio Sagara, Satoshi Konishi, Current status of the continuous tritium recovery test campaign using PbLi droplets in vacuum, Fusion Engineering and Design Volume 146 (2019) 898-901. DOI: 10.1016/j.fusengdes.2019.01.108　研究員・興野さんのVSTを使った水素回収に関する論文

2018

  • Hoseok Nam, Ryuta Kasada, Satoshi Konishi, Economic Analysis Between Diesel and SOFC Electricity via Fusion-Biomass Hybrid Model, Journal of Fusion Energy 37 (2018) 333–345. DOI: 10.1007/s10894-018-0192-z　南君の核融合バイオマスハイブリッド炉の経済性評価に関する論文
  • Takashi Nozawa, Kazumi Ozawa, ChangHo Park, Joon-Soo Park, Akira Kohyama, Akira Hasegawa, Shuhei Nogami, Tatsuya Hinoki, Sosuke Kondo, Toyohiko Yano, Tamaki Shibayama, Bun Tsuchiya, Tatsuo Shikama, Shinji Nagata, Teruya Tanaka, Hirotomo Iwakiri, Yasushi Yamamoto, Satoshi Konishi, Ryuta Kasada, Masatoshi Kondo, Tomoaki Kunugi, Takehiko Yokomine, Yoshitaka Ueki, Nariaki Okubo, Tomitsugu Taguchi, Hiroyasu Tanigawa, Japanese activities of the R&D on silicon carbide composites in the broader approach period and beyond. Journal of Nuclear Materials 511 (2018) 582-590. DOI: 10.1016/j.jnucmat.2018.05.045　
    日本の核融合R&Dに関するレビュー論文
  • Keisuke Mukai, Fernando Sanchez, Tsuyoshi Hoshino, Regina Knitter, Corrosion characteristics of reduced activation ferritic-martensitic steel EUROFER by Li2TiO3 with excess Li, Nuclear Materials and Energy volume 15 (2018) pages 190-194. DOI: 10.1016/j.nme.2018.04.010　
    向井助教の低放射化鋼の腐食に関する論文
  • Tomoki Urakawa, Hideaki Matsuura, Yasuko Kawamoto, Satoshi Konishi. “Influence of modified neutron emission spectrum on tritium production performance in blanket systems with NBI-heated deuterium plasma.” Fusion Engineering and Design 136 (2018) 678-682. DOI: 10.1016/j.fusengdes.2018.03.056 　
    中性子スペクトルがトリチウム生産に与える影響についての共著論文
  • C. Park, T. Nozawa, R. Kasada, S. Tosti, S. Konishi, H. Tanigawa, The effect of wall flow velocity on compatibility of high-purity SiC materials with liquid Pb-Li alloy by rotating disc testing for 3000 h up to 900° C. Fusion Engineering and Design 136 (2018) 623-627 DOI: 10.1016/j.nme.2018.03.042　博士課程・パク君のLiPb中のSiCの腐食に関する論文
  • S. Takeda, S. Sakurai, R. Kasada and S. Konishi, “Plasma Control Requirements for Commercial Fusion Power Plants: A Quantitative Scenario Analysis With a Dynamic Fusion Power Plant Model,” in IEEE Transactions on Plasma Science, 46 (2018) 1205-1210. DOI: 10.1109/TPS.2018.2794560. 博士課程・武田君の商用核融合炉のシナリオ分析に関する論文


Before 2017

　2017年以前は現在準備中です。論文/学会発表をご覧ください。著者で探す際にはScopusの著者検索をご活用ください。

　Publication list before 2017 is under preparation…

日本語解説論文 / Reviews